Arrived at Seattle Airport Seattle, Washington.
Monthly Archives:April 2016
As warm weather approaches, you might begin to think about ways to keep the kids busy when they’re out of school or ways for the family to spend time together. A pool is the ideal type of entertainment, and you can often find pools that are easy to install and set up in the yard. If you’re looking for ways to save money, then consider wholesale pool pumps and filters. These are sometimes sold in multiples, so it’s best to find someone else who is going to set up a pool so that you can get the best deal possible by splitting the cost of the supplies.
Before you set up a pool, you need to find out if there are any limitations on the size, especially if you live in the city. Your local zoning office can give you the details that you need when it comes to where you can put your pool and if you need to stay within any restraints when it comes to the size or design.
Think about the depth of the pool. Your filter and pump will usually work depending on the amount of water that is in the pool, so if you find something that is a larger size, then your equipment might work overtime compared to getting something a little smaller. You also need to think about children and the depth of the water that will be safe for them.
Find a proper location in the yard for the pool. Make sure it’s flat, and place a plastic tarp under the pool so that there aren’t any sticks of debris that could puncture the lining. An idea is to clear off the area and add sand before placing the tarp. Avoid putting the pool under a tree as you don’t want leaves in the water. When the pool is in place, you can begin filling it with water. After the pool is filled with water, add all of the chemicals that are needed. You can also take this time to add any decorative details as well as the ladder and pump. All of this needs to be in place about 24 to 48 hours before you begin swimming in the water.